7 Steps for Installing Vinyl Siding

Too much could lead to restocking fees or storage issues while too little could cause delays. To determine the amount of siding required, measure the length and width (in inches) of every section where the siding will be installed. Siding installation commonly faces challenges such as achieving proper gapping, managing water infiltration, and maintaining consistent reveals. Proper water management ensures the longevity of the siding and prevents potential damage to the underlying structure. A more professional approach requires a crimping tool that fastens aluminum clips to the top edge of the siding or a siding punch.

If your home has gables, you’ll need gable trim before attaching your siding.
Proper installation is critical to ensure that the siding serves its intended purpose effectively and for a long time.
It will remove the finish or patina and create a visually uneven and structurally unstable board.
When installing corrugated metal siding you will need to install metal head flashing around a window.
Spend some time getting this right as the rest of your siding installation will depend on this step.

Huge savings on Windows, Siding, Roofing & Doors!

Once the starter strip is installed, the siding panels are then custom cut and installed from the bottom to the top of the home. Mounting blocks for light fixtures and electrical boxes are then installed. In addition, vented and unvented soffits, as well as fascia covers, are available.

The Siding Installation Process Any Quality Contractor Should Follow

Trespa Pura NFC sidings install easily and look great for many years. At the juncture of the roof and vertical surfaces, flashing and counterflashing shall be provided per the roofing manufacturer’s instruction. Pre-drilling of nail hole is required to avoid cracking in colder temperature, 32°F or below. Use the suggested PVC trim and siding adhesives to install the Inte-Lock to the Siding panel. Fiber cement siding from Allura is one of the best options available.

Nailing Methods

Factors such as the complexity of the project, the size of the home, and the type of siding being installed can all impact the length of time required for installation. All the time I see new construction where the step flashing going up the long rake walls on big box houses is not visible at all. The sider has nailed his J channel after laying it flat on the roofer’s shingles. Using a chalk line, go to the other corner and use a level to ensure the line is accurate. Go around the entire house and build your start lines with starter strip.

This step-by-step video shows Trespa Pura sidings horizontal installation using wood furring strips. House wrap or foam insulation acts as a moisture barrier, protecting the wall from water damage while improving energy efficiency. This step is critical for preventing mold and mildew buildup behind the siding. If there is old siding on the house, it must be removed completely to provide a solid base for the new installation. Leaving damaged or uneven materials underneath can cause siding panels to shift, warp, or become misaligned. As seen in this video, there are very precise steps you need to take to install the siding properly.

Installation Guidelines

Vinyl siding is primarily made of polyvinyl chloride (PVC) but also includes various additives for enhanced durability and UV resistance. How to pick high-quality vinyl siding that will stand the test of time. Check out what makes us the best siding installation crew in Kansas City—and discover the benefits of new siding for your home. Once your old siding is removed, the crew can check for damage such as wood rot—something that’s common with old stucco.

For residents of Ashwaubenon, choosing the right siding material and ensuring its proper installation is a decision that pays dividends in both the short and long term. Whether it’s a summer storm or a winter blizzard, a well-installed siding panel stands as your first line of defense, ensuring the integrity and comfort of your living space. Keep in mind that most types of exterior walls have insulation between the wall studs. The problem is that significant energy is lost through the wood studs themselves. As one of the best reasons to install siding in the winter, insulated house siding can make a big difference in interior comfort levels as well as energy conservation. Let’s talk about insulated house siding and why you should upgrade with this product in the wintertime.

To ensure level siding panel installation, you must install the starter strip at the bottom of the wall. Spend some time getting this right as the rest of your siding installation will depend on this step. Lay out the job when applying horizontal siding to avoid odd slivers of material above doors and above or below windows.

Drop siding comes in a wide variety of face finishes, including Dutch Lap (also called German or Cove Lap) and log siding (milled with curve). Wood siding is very versatile in style and can be used on a wide variety of building structures. Yes, we will completely remove and haul away all of your old siding and replace it with durable, energy efficient Champion siding.

Mastering the Tricky Parts: Soffit and Fascia

Once you’ve layered enough siding installation panels to reach a window, you’ll likely need to cut some to fit beneath the openings.
Leave a gap between the head of the nails and the panels being locked.
Though masonry can be painted or tinted to match many color palettes, it is most suited to neutral earth tones, and coatings such as roughcast and pebbeldash.
It’s the material of choice on new luxury homes, and the first choice for remodeling projects large and small.
Use galvanized siding nails and make sure that the nails penetrate a minimum of 1-1/4 inches into the framing.
When you choose HANSONS to protect your home’s exterior, you get a Lifetime Guarantee that’s unmatched in the industry.
While the upfront costs for smart homes are often higher, smart homeowners can quickly recover the costs with lower energy bills.

Cutting fiber cement boards can create a lot of dust around your home. Cleanup afterward is important to remove any lingering debris. Washing off the installed boards is also common after installation to remove any dust and grit. Once you have found a reliable contractor, like Banner Construction, who has given you an estimated cost for your siding project, it is time to prepare for the installation. Understanding the process will help you have realistic expectations and ensure a smooth and high-quality home improvement project. Proper cleanup and maintenance of your vinyl siding will ensure its longevity and appearance.

How To Install Head/Jamb Trim On A Doorway

First, measure a side of your door or window and add a half inch, mark that extra half inch and leave it for now.
Also avoid putting panels shorter than 24 inches on the beginning or ending sides.
Ensure you slide the panel into the j-channel if you have a door, window, or a corner you are siding into.
Jan has a Golden Rule for vinyl siding installation, “Always manage the movement of the product.” All polymer products expand in the heat and contract in the cold.
The installation clips (AW08) are made of aluminum and serve to attach each board to the joists and allow air to circulate under the siding.
It may not be ideal for every home, particularly in historic districts, but vinyl siding can significantly enhance curb appeal and energy efficiency for many properties.
Leaving a quarter inch of space where each panel butts the corner post, snap the panel bottom into a starter strip and nail it into the wall.
By following these steps, you can achieve a clean and polished look for your window and door trim.

Both the rigid foam and siding can be nailed in place with galvanized shingle nails. The first steps you need to make is choosing a reputable contractor and deciding on the siding material. There are several materials to choose from such as vinyl, wood, stucco, brick, or aluminum. One of the most popular siding materials in North America is fiber cement siding.

All installers should learn and follow “best practices” in order to deliver a better job for their customer and reduce call backs. We’re ready to help transform your home with durable, energy-efficient products that can help protect your home, improve your comfort and save you money. A simple calculation will help you to order the correct square footage for your materials. Simply multiply each wall’s height and width, then add enough for your gables. Vinyl siding copes well with extreme weather and locks tightly to your home. It’s available in an impressive palette of sun-resistant shades.

Cost of a New Siding Installation

Except for larger widths, fiber cement siding is blind nailed. That is, the one nail that holds the siding is hidden behind the next row of lap siding. More siding installers need to learn how to properly install it than ever before. In many ways, installing fiber cement siding is similar to installing wood siding, but there are some differences that need to be addressed in order for it to be installed properly.

Installing the starter strip and corner posts

When vinyl siding is not installed correctly, it can fail to protect your home from the elements, potentially leading to costly repairs. When installing new siding, it’s crucial to ensure that it’s done correctly, adhering to local building codes and using the right techniques for long-lasting results. In cases where the existing siding is aging, replacing it with new vinyl siding can rejuvenate the appearance of your entire house. While vinyl siding is known for its durability, it’s important to be aware of the signs that indicate it’s time for siding replacement or repair. Quality siding materials coupled with expert installation minimize the necessity for regular maintenance and repairs.

Remove Exterior Fixtures:

Decks, for example, would require you to install two starter strips. Siding contractor near me One on the bottom of the house, and again one just above where your deck boards are installed. You can start by gently prying up the top piece of vinyl where it overlaps the one below it. This will unhook it from the channel, which you can slide off and expose the nails underneath. Next, remove each nail carefully using a nail puller or hammer and repeat this piece by piece all the way down. You can then remove all of the trim pieces that remain around windows and doors unless you reuse them for your new siding.

This is the most common installation mistake and the most costly. When the wood arrives it will begin to change sizes to adjust to its new climate. The worst thing you can do is install siding during this phase. The last thing you want to do is install it DURING the change. We cleaned it before putting it up, but I didn’t remember to get photos/video AFTER I cleaned it.

Preparing Your Home Before Installing Vinyl Siding

This step also helps you avoid damaging the surrounding landscape. We not only offer the best siding installation but other home improvements as well. We are your leading provider of siding installation and window replacement services. Contact us today to give your home a fresh look and increase its value.

Inspection and cleanup

For horizontal siding panels, space the fasteners 16 inches apart (at most). The accessories should be spaced out every 8 inches to 12 inches, except when otherwise specified by the manufacturer. Selecting the perfect material for your home’s cladding entails considering a wide array of alternatives. For many years, vinyl siding has been a favored option, largely because of its numerous benefits and advantages. Among these, its resilience and low upkeep requirements stand out. And because the color permeates each siding piece, scraping or painting is not a necessity.

Vinyl siding is considered the easiest to install and comes in various colors. Vinyl siding is usually considered the easiest to install on your own. If you are unsure about why something needs to be fixed, have your contractor show you the damage and explain the issues. Ask to see what sheathing looks like that is in good condition so you can compare. It may be helpful to clear your driveway to allow construction workers better access to your home. Move your vehicles away from your home to prevent damage from loose debris.

Pros and Cons of Installing Vinyl Siding Yourself

Masonry walls as such do not require siding, but any wall can be sided. Walls that are internally framed, whether with wood, or steel I-beams, however, must always be sided. Trespa Pura NFC® is a versatile solution for most siding projects and gives maximum design freedom and a long lasting, beautiful finish.

It’s durable, attractive, and designed to withstand harsh climates. And our wide variety of colors and styles allows you to choose a design that complements your home’s design aesthetic and architecture, giving you the best exterior money can buy. Next, multiply the values and divide by 144 to obtain the total square footage of each section.

If you’re hoping to take the DIY route, you’ll need your siding panels, J channels, nails, and corner pieces. Before installing siding, a weather-resistant barrier like house wrap or felt paper is applied to protect against moisture. In some cases, foam board insulation is added for extra energy efficiency and a smoother surface. Proper installation of these layers helps prevent water infiltration and improves insulation.

Then install a 9-inch-wide horizontal sill that is level with the window’s bottom edge. Press the flashing into the bead of sealant firmly to get a good seal. Costs of composites tend to be lower than wood options, but vary widely as do installation, maintenance and repair requirements.

🪟 Install J-Channels Around Windows & Doors:

Once you feel it is locked into place, you can secure it to the wall on one end and start inserting the foam on the other end by pulling back the panel and dropping it into place. A nice feature here is that you can slide the foam down the line of the panel. After you have all the foam in place, secure the rest of the panel by screwing or nailing it to the studs of the wall and in between. Before you start working with siding panels, you’ll install a variety of accessories, including starter strips, corner pieces, flashing, J-channels, etc. Installing fiber cement siding is similar to other siding projects but may take a bit of extra work on the part of your contractor. Like other types of siding, fiber cement is installed against a protective layer and nailed into the studs.

Step 4

Let those babies breathe a little with a bit of wiggle room because vinyl siding expands and contracts with temperature changes. The total cost for vinyl siding installation can range from $6,370–$18,250 for a typical 2,000-square-foot home. Place your panel below the window and measure the width of the opening using the panel.